Tüm ürünler
Food grade PP Packaging for Effervescent Tablets pills with color and logo customized
| Menşe yeri | Çin |
|---|---|
| Marka adı | JND |
| Sertifika | FSSC 22000;ISO 9001; |
| Model numarası | VCB29F48 |
| Min sipariş miktarı | 50000 adet |
| Fiyat | $0.067/pieces 10000-19999 pieces |
| Ambalaj bilgileri | PE Çantası +Kağıt Karton Boyutu: 1100 PCS tüpü için 580*380*330mm; 380*290*460mm 1500 pcs kapağı (al |
| Teslim süresi | 3-5 gün |
| Yetenek temini | Tüp için günde 38000 pc; CAP için günde 47000pcs |
Ücretsiz numuneler ve kuponlar için bana ulaşın.
Whatsapp:0086 18588475571
WeChat: 0086 18588475571
Skype: sales10@aixton.com
Eğer herhangi bir endişeniz varsa, 24 saat online yardım sağlıyoruz.
xÜrün ayrıntıları
| Endüstriyel kullanım | Tıbbi Test Testleri; Vitamin, mineral, takviyeler, şekerler tableti | Tüp şekli | Silindir |
|---|---|---|---|
| Vücut malzemesi | PP | Kapak malzemesi | Pe |
| Plastik tip | PP | Kapak | üst çevirin |
| Oem | Kabul etmek | Baskı | Sıcak Transfer Baskı veya IML |
| Hacim | 24.5 ± 1ml | Uygulama | Tıbbi Test Testleri; Vitamin, mineral, takviyeler, şekerler tableti |
| kurutucu | Evet | Ürün adı | Tüp Ambalaj Efervesan Tabletler |
| Anahtar kelime | Yeni ürün efervesan tablet plastik tüp | Özellik | sağlıklı |
Ürün Açıklaması
Product Specification:
- As Below show the key AQL=0.65, Main AQL=2.5, Light AQL=4.0 under the standard of GB2828.1-2012
- Inspect the function and size according to the special inspection level S-3, and inspect the appearance according to the general inspection level II
| Type | No. | Item | Specifications | Inspection method | AQL Type | |
Molding
| 1
| Appearance |
| Visual | Light | |
| 2 | Peculiar smell | No peculiar smell different from the material itself. Complete structure injection mold in accordance with the standard sample | Smell | Main | ||
| Size | 1 | ￠29*48 | Diameter | 29.0±1.0mm | caliper | Main |
| Height | 48.0±1.0mm | Height gauge | Main | |||
| Wall Thickness | 1.0±0.4mm | caliper | Main | |||
| 2 | ￠29 Flip-top cap | Diameter | 29.0±0.8mm | caliper | Main | |
| Height | 15.0±1.0mm | Height gauge | Main | |||
| Function | 1 | Sealing Property | Filling nominal capacity of water into the tube and tighten the cap, then Horizontally placed in the ground without leakage after 4 hours. | Visual | Main | |
| 2 | Drop Property | Filling nominal capacity of 20±5℃water into the tube and tighten the cap, then drop at 1.0m height, the bottom hits the cement flat ground, continuously dropping 3 times without rupture. | Visual | Main | ||
| 3 | Thermo stability | Filling 90 degrees of hot water into tube, and cover the cap, then move to the 60 degrees thermostat. After 30 minutes, observe that the product should not be deformed or ruptured | Visual | Main | ||
| 1 | Drawing | Color, Picture and Words same as standard sample | According to standard sample | Key | ||
| 2 | Appearance | The appearance of the printed product is clean no soiling and deformity refer to standard sample | Visual | Light | ||
| 3 | Peel strength | Use 3M600tape, smooth pull up the tape at an angle of 45 degrees no large area peeled off. | Tape test | Main | ||
Storage:
♦keep in a cool, dry and ventilated place. Not in sunlight, rain, near the heat source, exposed to high temperature, high humidity environment (normal temperature storage, humidity > 65%)
♦Need to pad higher, away from the ground and wall 10cm above. no pressure
Önerilen Ürünler
